DigiCase System

The DigiCase System is a low-cost version of the Standard System. It is very suitable for small events and training sessions, but it can also be used for timing split points in big events.

(The DigiCase System is a low-cost version of the Standard System)
 

The DigiCase System is modular like the Standard System. This means it can be used it in different ways, and also combined with other DigiCase Systems.

A DigiCase System consists of the following components :

Specifically for DigiCase, new low-density mats of 4 x 1 or 1 x 4 meter have been developed. These mats can be rolled up.
Besides the new low-density mats, the existing standard mats of 1 x 2 meter can be used with the DigiCase as well, the classic as well as the lightweight.

ChampionChip strongly advises against using triathlon mats: they only have half of the receive antennas and thus make a very low-density timing point.
Timing Kit mats cannot be used in a DigiCase set-up at all.

Possible DigiCase System set ups


 

One DigiCase Mat is 1 meter wide and 4 meters deep, or 4 meter wide and 1 meter deep. The timing location has to be a narrow chute and participants must pass through one at a time. There is no back up line.

 

With more DigiCase Systems it is possible to build several chutes next to each other. They can be combined to build two 1 x 4 meter lines next to each other, separated by at least 0.5 meter. Each line can be seen as a main or back up line.

Two DigiCase Systems can be combined to build a 2 x 2 meter main line and a 2 x 2 meter back-up line.

Two DigiCase Systems can be combined to build a 2 x 2 meter main line and a 1 x 4 meter back-up line.